Operation Manual

Appliances

102 Caravan - 10-12 - EN

Changing the battery on the

automatic ignition:

 Ensure that the heater is switched off and, if applicable, cooled down.

 Remove the heater cover. To do so, push the locking springs (Fig. 101,1) side-

ways and outwards, swivel the cover forwards and lift it out of the lower

brackets.

 Slide the cover of the battery compartment at the automatic ignition (Fig. 102)

upwards.

 Remove the old battery from the battery compartment of the automatic igni-

tion.

 Insert a new battery of the same type into the battery compartment of the auto-

matic ignition, observing the correct polarity (+/-) (Fig. 102). Use only tempera-

ture-resistant (+70 °C) and leak-proof Mignon batteries.

 Slide the cover of the battery compartment at the automatic ignition down-

wards.

 Mount the heater cover. To do so, insert the cover into the lower bracket

(Fig. 103,1).

 Swivel the cover in until the catch levers engage audibly (Fig. 103,2).

 Check for correct sitting by pulling the cover.

Fig. 101 Removing the heater cover Fig. 102 Changing the batteries

Fig. 103 Mounting the heater cover