Operation Manual

Living
7
72 Caravan - 12-11 - EN
7.13 Converting seating groups for sleeping
7.13.1 Bench seating group and side seating group
 Convert the table (Fig. 73,3) to a bed foundation (see Section 7.8).
 Insert the bar (Fig. 73,4) or pull it to the middle. The bar is correctly positioned if
it supports the table-top directly behind the table leg.
 Pull the seat cushions (Fig. 74,2) into the centre.
 Insert the back cushions (Fig. 74,1) between the seat cushions and the wall.
Z In the event of an accident, emergency braking or on uneven road surfaces,
additional cushions with reinforced undersides can be thrown through the
vehicle and damage parts of the equipment. Before setting off, stow the additi-
onal cushions safely away or secure them with the straps provided for that pur-
pose.
Z Depending on the model, the seating group can be slightly different in shape
and position to the one shown here.
Fig. 73 Prior to conversion
Fig. 74 After conversion
1 Back cushion
2 Seat cushion
3 Table
4 Bar
5 Mounting rail
Z Depending on the model, an enclosed additional cushion must be inserted bet-
ween the seat cushions.