Operation Manual

Living
7
66 Caravan - 12-11 - EN
7.9 Television
Flat screen in the TV cabinet The flat screen is attached to a console in the TV cabinet.
Pulling the television console
forward:
 Press the release knob (Fig. 63,5) and pull the holder for the flat screen forward
as far as possible by the handle (Fig. 63,4).
Swivelling the television
console:
 Pull the release knob (Fig. 63,1) and swivel the flat screen (Fig. 63,2) to the
desired position.
 Loosen the knurled screw (Fig. 63,3).
 Set the desired angle for the flat screen and re-tighten the knurled screw.
Flat screen with jointed arm The flat screen is fastened to a jointed arm.
Positioning the flat screen with
jointed arm:
 Pull on the fabric strip (Fig. 64,3) to unlock the jointed arm (Fig. 64,2).
 Swivel flat screen (Fig. 64,1) into the required position.
 Take hold of the flat screen at the top and bottom edge with both hands and set
the desired angle of inclination.
X Before starting your journey, remove the television from the support and
store it securely.
X Before commencing the journey, place and secure the flat screen and screen
support in the initial position. If the screen holder is installed in a TV cabinet:
Close TV cabinet.
X Before commencing the journey, ensure that the antenna is in park position.
Danger of accidents!
Fig. 63 TV cabinet
Fig. 64 Flat screen with jointed arm