Operation Manual

Living
7
65Caravan - 12-11 - EN
7.8.3 Swivel table of the rear seating group
The table top can be swiveled into different positions.
Swivelling the table top  Loosen the tommy screws (Fig. 61,1, 3 and 5).
 Swivel table top (Fig. 61,2) into required position.
 Tighten the tommy screws again.
The swivel table can be removed for the bed conversion.
Removing the swivel table for
bed conversion
 Undo the tommy screw (Fig. 61,5).
 Pull the table top (Fig. 61,2) with the table leg (Fig. 61,4) out of the holder
(Fig. 61,6) and put it to one side.
7.8.4 Lift-off table for the round seating group
The lift-off table's lifting mechanism enables it to be used as a bed foundation.
Conversion to bed foundation:
 Swivel the catch lever (Fig. 62,2) to the left. The lock is open.
 Press the table-top (Fig. 62,1) in the middle downwards to the desired stop limit
(Fig. 62,3 or 4) and hold it down.
 Swivel the catch lever to the right. The lift-off table is locked.
Fig. 61 Swivel table
1 Tommy screw
2 Table-top
3 Tommy screw
4 Table leg
5 Tommy screw
6 Holder
Z The lift-off table is not secured to the floor. Before starting the journey, lower
the lift-off table to the upper stop and fasten with the accompanying belts to
the benches.
Fig. 62 Lift-off table for the round
seating group
4
3
2
1