Operation Manual

Maintenance
13
168 Caravan - 12-11 - EN
13.8.5 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 179,1).
Changing bulbs:
 Use a screwdriver to remove the inner cover ring (Fig. 179,3) from the housing.
 Remove the cover ring with the glass.
 Remove the halogen bulb (Fig. 179,2).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
13.8.6 Surface-mounted halogen light (swiveling)
Changing bulbs:
 Use a suitable tool (e.g. a screwdriver) to lever out and remove the cover
(Fig. 180,1).
 Remove halogen bulb.
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
Fig. 179 Recessed halogen light
Fig. 180 Surface-mounted halogen light
(swiveling)
1