Operation Manual

Sanitary fittings
11
147Caravan - 12-11 - EN
11.7.3 Vacuum toilet (Dometic)
The flushing of the toilet is fed directly from the water system of the vehicle.
Putting into operation:
 Turn on power supply. The yellow LED (Fig. 162,1) on the panel (Fig. 161,1) turns
on for ca. 1 minute. A vacuum is generated in the system.
 If the green LED (Fig. 162,3) on the panel lights up, lift the pedal (Fig. 161,3)
briefly, so that some water runs into the toilet bowl (Fig. 161,2) and the stopper
on the bottom is covered with water.
The vacuum toilet is ready for operation.
Flushing:
 Close the lid of the toilet.
 Press down the pedal (Fig. 161,3) for several seconds.
 Briefly lift the pedal, so that some water runs into the toilet bowl (Fig. 161,2) and
the stopper on the bottom is covered with water.
The red LED (Fig. 162,2) lights up if the cassette must be emptied or removed.
Removing the cassette:  Remove the cassette and empty it as described in Sections 11.7.4 and 11.7.5.
Z Only flush the toilet if the toilet lid is closed.
Fig. 161 Vacuum toilet Fig. 162 Vacuum toilet panel
Z Flushing only functions if the green LED is lit.