Operation Manual

Sanitary fittings
11
146 Caravan - 12-11 - EN
 Swing the fresh water filler neck (Fig. 159,1) towards the outside.
 Remove the screw cap (Fig. 159,2).
 Fill with fresh water until the fluid level reaches the top edge. This corresponds
to approx. 15 l.
 Close the screw cap.
 Swivel the fresh water filler neck inwards.
 Close the flap for the Thetford cassette.
Flushing:  Before flushing open the sliding trap of the Thetford toilet. To do this, turn the
slide lever (Fig. 160,1) anticlockwise.
 For flushing, press the blue flush button (Fig. 160,3).
 After flushing close the sliding trap. To do this turn the slide lever (Fig. 160,1)
clockwise.
The indicator lamp (Fig. 160,2) goes on whenever the Thetford cassette has to be
emptied.
Emptying:
 Turn the slide lever (Fig. 160,1) clockwise. The sliding trap is closed. To empty,
the sliding trap in the Thetford toilet must be closed.
 Remove the Thetford cassette and empty it as described in Sections 11.7.4 and
11.7.5.
Emptying the water tank:  Open the sliding trap. To do this, turn the slide lever in an anticlockwise direc-
tion.
 Press the flush button until water ceases to flow into the bowl.
 Close the sliding trap. To do this turn the slide lever in a clockwise direction.
 Open the flap for the Thetford cassette.
 Swing the fresh water filler neck towards the outside.
 Remove the screw cap from the fresh water filler neck.
 Turn the fresh water filler neck in an anticlockwise direction until the residual
water flows out.
 Turn the fresh water filler neck back in a clockwise direction.
 Screw the screw cap onto the fresh water filler neck.
 Swivel the fresh water filler neck inwards.
Fig. 160 Operating unit Thetford toilet
1
2
3