Operation Manual

Sanitary fittings
11
145Caravan - 12-11 - EN
11.7.1 Swivel toilet
The flushing of the Thetford toilet is fed directly from the water system of the
vehicle. The toilet bowl can be moved into the optimal position.
Flushing:
 Before flushing open the sliding trap of the Thetford toilet. To do this, push the
slide lever (Fig. 156,1) anticlockwise.
 For flushing, press the blue flush button (Fig. 157,1).
 After flushing close the sliding trap. To do this push the slide lever in a clockwise
direction.
The indicator lamp (Fig. 157,2) goes on whenever the Thetford cassette has to be
emptied.
Emptying:
 Turn the slide lever (Fig. 156,1) clockwise. The sliding trap is closed. To empty,
the sliding trap in the Thetford toilet must be closed.
 Remove the Thetford cassette and empty it as described in Sections 11.7.4 and
11.7.5.
11.7.2 Toilet with separate water tank
The Thetford toilet is flushed via its own water tank, which is integrated in the toilet
compartment.
The flap for the Thetford cassette (Fig. 158) is located on the outside of the vehicle.
Filling the water tank:
 Insert key into locking cylinder of the push-button lock (Fig. 158,1) and turn a
quarter turn clockwise.
 Remove the key.
 Press both push-button locks (Fig. 158,2) simultaneously with your thumb and
open the flap for the Thetford cassette.
Fig. 156 Thetford toilet bowl, swiveling Fig. 157 Flush button/indicator lamp
Thetford toilet
Fig. 158 Flap for Thetford cassette Fig. 159 Thetford cassette