Operation Manual

Appliances
10
123Caravan - 12-11 - EN
Filling the water heater with
water:
 Connect the vehicle to the external 230 V power supply and switch on the 230
V automatic circuit breaker.
 Switch off the operating switch (Fig. 130). The indicator lamp (Fig. 130,1) in the
switch is not on.
 Close the drain cock. To do so, turn the cap (Fig. 131,1) clockwise.
 Set all the water taps to "Hot" and open them. The water pump is turned on. The
hot water pipes are filled with water.
 Keep the taps open until the water flowing out of the taps has no bubbles in it.
This is the only way to ensure that the water heater is full of water.
 Close all water taps.
Emptying the water heater:
 Set the 12 V main switch on the panel to "AUS" ("OFF") (Power Pack SE).
 Switch off the 230 V power supply at the 230 V automatic circuit breaker.
 Remove the cap of the water tank.
 Take out the stopper of the water tank.
 Open all water taps and set to the central position.
 Hang the shower handset up in the shower position.
 Hold the water pump up until the water pipes are completely empty.
 Open the drain cock of the water heater. To do so turn the cap (Fig. 131,1) antic-
lockwise.
 Check whether the water is completely drained from the water heater.
10.5 Cooker
Fig. 131 Drain cock for water heater
Z Further information can be obtained from the separate instruction manual
"Water heater".
X Never let gas escape unburned due to danger of explosion.
X Before using the cooker make sure that there is sufficient ventilation. Open
windows or the skylight.
X Do not use gas cooker or gas oven for heating.
X Always protect your hands with cooking gloves or potholders when hand-
ling hot pots, pans and similar items. There is a risk of injury.