Operation Manual

Appliances
10
115Caravan - 12-11 - EN
Timer The air conditioning unit can be switched on or off automatically from the current
time up to 15 hours in advance with the integrated timer. Pre-programming up to
a certain time is not possible.
 To program, switch on the air conditioning unit with the key (Fig. 121,7) on the
remote control.
 Set the desired operating mode and room temperature with the keys
(Fig. 121,8, 3 and 4).
 Use the key (Fig. 121,5) to select the desired function (Fig. 121,1):
z"ON": Switching on
z"OFF": Switching off
 Use the keys (Fig. 121,4) to select the desired switching time (1 to 15 hours). The
arrow (Fig. 121,2) flashes and indicates the setting mode.
 If "ON" (switch on) was selected, the air conditioning unit must be switched off
again with the remote control after the setting process. The indicator lamp in
the receiver flashes and confirms the programming.
 The indicator lamp in the receiver flashes and confirms the programming if
"OFF" (switch off) was selected. Do not switch off the air conditioning unit with
the remote control.
Z To go easy on the batteries in the remote control, the infrared transmitter can
be covered by hand and the remote control then switched off after the "OFF"
programming. In this way no signal is transferred to the receiver and the pro-
gramming is retained.
Z The key (Fig. 121,6) is used to send the settings of the remote control repeatedly
to the receiver.
Z Further information can be obtained in the manufacturer's instruction manual.