Operation Manual

Appliances

108 Caravan - 12-11 - EN

Start screen The Start screen appears on the display after the heater is switched on. The Start

screen contains the following information:

Adjustment menu The "MENU" button calls up the adjustment menu. The meanings of the individual

symbols are described in the following table.

The values can be increased or reduced via the "+" or "-" symbols.

Resetting the heating to the

factory setting:

 Keep the "MENU" button pressed for 15 seconds.

Tool menus The various heater functions can be called up and adjusted via the tool menus. The

arrow symbols are used to change between the menus. The meanings of the indi-

vidual symbols are described in the manufacturer's instruction manual.

Setting the pump speed:

 Press the "MENU" button.

 Press the " " symbol.

 Page downward using the arrow.

 Press the " " symbol.

 Press the "+" button until the desired level has been reached.

 Use the "OK" button to confirm the entry.

Symbol Meaning

This symbol appears when the circulating pump is activated

This symbol appears when a switching facility for gas cylinders is ac-

tivated

This symbol appears when a voltage of 230 V is present at the heater

The internal temperature is displayed next to this symbol

The external temperature is displayed next to this symbol if an exter-

nal sensor is fitted

Symbol Meaning

Set the desired temperature from +5 to +30 °C

Set the water temperature in the boiler

Set the heat output in electrical operation

Activate the function "Heating in gas operation"

Call up the enabling menu for the tool menus