Operation Manual

Living
7
74 Caravan - 12-10 - EN
7.12.6 Widening the bed into a playing area (Variant 2)
 Swing the table (Fig. 80,3) 45° upwards and take it out of the upper retainer
(Fig. 80,5).
 Remove the table leg (Fig. 80,4).
 Insert the bar (Fig. 80,6) or pull it to the middle. The bar is correctly positioned if
it supports the table-top directly behind the holder for the table leg.
 Hang the table into the lower retainer (Fig. 81,6) and lay it on the bar.
 Fold up the additional board (Fig. 81,7).
 Put the support legs (Fig. 81,8) into the additional board.
 Place the additional board next to the bed (Fig. 81,9).
 Pull the seat cushions (Fig. 82,2) into the centre.
 Insert the back cushions (Fig. 82,1) between the seat cushions and the wall.
 Place the additional cushion (Fig. 82,10) next to the bed (Fig. 82,9).
Fig. 80 Prior to conversion
Fig. 81 During conversion
Fig. 82 After conversion
1 Back cushion
2 Seat cushion
3 Table
4 Table leg
5 Retainer
6 Retainer
7 Additional board
8 Support legs
9 Bed
10 Additional cushion