Operation Manual

Maintenance
13
164 Caravan - 12-10 - EN
13.8.4 Recessed halogen light (flat)
The recessed halogen light (Fig. 173,1) is installed recessed.
Changing bulbs:  Use a screwdriver to remove the inner cover ring (Fig. 174,1) from the housing.
 Use a screwdriver to remove the cover ring with the glass (Fig. 174,2) from the
lower section of the recessed halogen light.
 Remove the halogen bulb (Fig. 174,3).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
13.8.5 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 175,1).
Changing bulbs:
 Use a screwdriver to remove the inner cover ring (Fig. 175,3) from the housing.
 Remove the cover ring with the glass.
 Remove the halogen bulb (Fig. 175,2).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
Fig. 173 Recessed halogen light (flat) Fig. 174 Changing the halogen bulb
Fig. 175 Recessed halogen light