Operation Manual

75Caravan - 09-09 - DET-0030-09EN
Living
7
7.12 Converting seating groups for sleeping
7.12.1 Bench seating group and side seating group
 Convert the table (Fig. 84,3) to a bed foundation (see section 7.7).
 Insert the bar (Fig. 84,4) or pull it to the centre. The bar is correctly posi-
tioned if it supports the table-top directly behind the table leg.
 Pull the seat cushions (Fig. 85,2) into the centre.
 Insert the back cushions (Fig. 85,1) between the seat cushions and the
wall.
 In the event of an accident, emergency braking or on uneven road sur-
faces, additional cushions with reinforced undersides can be thrown
through the vehicle and damage parts of the equipment. Before setting off,
stow the additional cushions safely away or secure them with the straps
provided for that purpose.
 Depending on the model, the seating group can be different in shape and
position to the one shown here.
Fig. 84 Prior to conversion
Fig. 85 After conversion
1 Back cushion
2 Seat cushion
3 Table
4Bar
5 Mounting rail
 Depending on the model, an enclosed additional cushion must be inserted
between the seat cushions.