Operation Manual

68 Caravan - 09-09 - DET-0030-09EN
Living
7
Swivelling the television
console:
 Pull the release knob (Fig. 68,1) and swivel flat screen (Fig. 68,2) to the
desired position.
 Loosen knurled screw (Fig. 68,3).
 Set the desired angle for the flat screen and re-tighten the knurled screw.
Flat screen with jointed
arm
The flat screen is fastened to a jointed arm.
Positioning the flat screen
with jointed arm:
 Pull on the fabric strip (Fig. 69,3) to unlock the jointed arm (Fig. 69,2).
 Swivel flat screen (Fig. 69,1) into the required position.
 Take hold of the flat screen at the top and bottom edge with both hands and
set the desired angle of inclination.
Flat screen with swivel
arm
The flat screen is fastened to a swivel arm.
Positioning the flat screen
with swivel arm:
 Pull up the release knobs (Fig. 70,1 and 3) to unlock the swivel arm.
 Swivel the flat screen with the holder (Fig. 70,2) into the desired position.
7.9 Lamps
Fig. 69 Flat screen with jointed arm
Fig. 70 Swivel arm for flat screen
 Bulbs and light fittings can be extremely hot.
 Allow the light bulbs and lamp holders to cool down before touching
them.
 If the light is switched on or still hot, there must always be a safety dis-
tance of at least 30 cm between stores or curtains and flammable
objects. Fire hazard!