Operation Manual

66 Caravan - 09-09 - DET-0030-09EN
Living
7
 Fold the legs (Fig. 64,4) one after the other outwards, until the support clips
(Fig. 64,2) engage in the hooks (Fig. 64,1) of the guides.
 Carefully turn round the folding table and place it between the benches.
Removal:
 Carefully turn the folding table round and place it with the legs upwards
onto the seat cushions.
 Pull the levers (Fig. 64,3) on both legs one after the other and fully retract
the legs (Fig. 64,4).
 Place the folding table in the holder in the wardrobe and secure it.
Extending the table surface:
 Pull the complete cover plate of the bedside locker (Fig. 65,2) forwards.
 Fold the upper part of the cover plate (Fig. 65,1) backwards (Fig. 65).
7.7.4 Swivel table of the rear seating group
The table top can be swiveled into different positions.
Swivelling the table top
 Loosen the tommy screws (Fig. 66,1, 3 and 5).
 Swivel table top (Fig. 66,2) into required position.
 Tighten the tommy screws again.
The swivel table can be removed for the bed conversion.
Removing the swivel table
for bed conversion
 Undo the tommy screw (Fig. 66,5).
 Pull the table top (Fig. 66,2) with the table leg (Fig. 66,4) out of the holder
(Fig. 66,6) and put it to one side.
Fig. 65 Folding table, bedside locker
Fig. 66 Swivel table
1Tommy screw
2Table-top
3Tommy screw
4 Table leg
5Tommy screw
6 Holder