Operation Manual

171Caravan - 09-09 - DET-0030-09EN
Maintenance
13
Changing bulbs:  Use a screwdriver to remove the inner cover ring (Fig. 197,1) from the
housing.
 Use a screwdriver to remove the cover ring with the glass (Fig. 197,2) from
the lower section of the recessed halogen light.
 Remove halogen bulb (Fig. 197,3).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
13.6.5 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 198,1).
Changing bulbs:
 Use a screwdriver to remove the inner cover ring (Fig. 198,3) from the
housing.
 Remove the cover ring with the glass.
 Remove halogen bulb (Fig. 198,2).
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
13.6.6 Surface-mounted halogen light (swivelling)
Changing bulbs:  Use a suitable tool (e.g. a screwdriver) to lever out and remove the cover
(Fig. 199,1).
 Remove halogen bulb.
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
Fig. 198 Recessed halogen light
Fig. 199 Surface-mounted halogen light
(swivelling)