Operation Manual

ManualsBrandsDethleffs ManualsCaravan2010

111

112

113

114

115

116

117

118

119

120

114 Caravan - 09-09 - DET-0030-09EN

Appliances

Start screen The Start screen appears on the display after the heater is switched on. The

Start screen contains the following information:

Adjustment menu The "MENU" button calls up the adjustment menu. The meanings of the indi-

vidual symbols are described in the following table.

The values can be increased or reduced via the "+" or "-" symbols.

Tool menus The various heater functions can be called up and adjusted via the tool menus.

The arrow symbols are used to change between the menus. The meanings of

the individual symbols are described in the manufacturer's instruction manual.

Selecting the operating

mode

The hot-water heater can be operated with the following energy sources:

 Gas operation

 240 V electrical operation

 Gas and 240 V electrical operation

The operating mode is selected from the operating unit.

Selecting gas operation:

 Press the "On" button next to the " " symbol. The gas operation is acti-

vated.

Selecting 240 V electrical

operation:

 Press the "+" button next to the " " symbol until the desired heat output

is reached.

Selecting gas and 240 V

electrical operation:

 Select gas operation and 240 V electrical operation on the operating unit.

Symbol Signification

This symbol appears when the circulating pump is activated

This symbol appears when a switching facility for gas cylinders

is activated

This symbol appears when a voltage of 240 V is present at the

heater

The internal temperature is displayed next to this symbol

The external temperature is displayed next to this symbol if an

external sensor is fitted

Symbol Signification

Set the desired temperature of +5 °C to +30 °C

Set the water temperature in the boiler

Set the heat output in electrical operation

Activate the function "Heating in gas operation"

Call up the enabling menu for the tool menus

 Select the output level during 240 V electrical operation in such a way that

it corresponds to the 240 V connection protection:

Level 1 (1050 W) at 6 A

Level 2 (2100 W) at 10 A

Level 3 (3150 W) at 16 A