Operation Manual

7
9C
aravan - 09-08 - DET-0030-08EN
Living
7
7.12.5 Widening the bed into a playing area (variant 2)
Swivel the table (Fig. 94,3) 45° upwards and remove it from the upper
retainer (Fig. 94,5).
Remove table leg (Fig. 94,4).
Insert the bar (Fig. 94,6) or pull it to the centre. The bar is correctly posi-
tioned if it supports the table-top directly behind the holder for the table leg.
Suspend the table in the lower retainer (Fig. 95,6) and set it down on the
bar.
Fold out additional board (Fig. 95,7).
Insert supports (Fig. 95,8) in the additional board.
Place additional board next to the bed (Fig. 95,9).
Pull the seat cushions (Fig. 96,2) into the centre.
Insert the back cushions (Fig. 96,1) between the seat cushions and the
wall.
Place the additional cushion (Fig. 96,10) next to the bed (Fig. 96,9).
Fig. 94 Prior to conversion
Fig. 95 During conversion
Fig. 96 After conversion
1 Back cushion
2 Seat cushion
3Table
4 Table leg
5 Retainer
6 Retainer
7 Additional board
8 Support legs
9Bed
10 Additional cushion