Operation Manual

7
5C
aravan - 09-08 - DET-0030-08EN
Living
7
7.12 Converting seating groups for sleeping
7.12.1 Bench seating group and side seating group
Convert the table (Fig. 83,3) to a bed foundation (see section 7.7).
Insert the bar (Fig. 83,4) or pull it to the centre. The bar is correctly posi-
tioned if it supports the table-top directly behind the table leg.
Pull the seat cushions (Fig. 84,2) into the centre.
Insert the back cushions (Fig. 84,1) between the seat cushions and the
wall.
Depending on the model, the seating group can be different in shape and
position to the one shown here.
Fig. 83 Prior to conversion
Fig. 84 After conversion
1 Back cushion
2 Seat cushion
3 Table
4Bar
5 Mounting rail
Depending on the model, an enclosed additional cushion must be inserted
between the seat cushions.