Operation Manual
7
3C
aravan - 09-08 - DET-0030-08EN
Living
7
Unfold: Remove the table from the upper retainer and lay it aside.
Remove the cushions from the seating group and lay them aside.
Grip the folded sleeping area (Fig. 78,1) of the folding bed in the middle
with one hand and tilt it slightly forwards.
Grip the folded sleeping area with the other hand from below and press
upwards.
During the upward motion, pull the lower edge of the folded sleeping area
forwards and tilt the upper edge backwards (Fig. 79).
Swivel the folded sleeping area as far as possible. Ensure that the curtains
and net curtains are on the outside of the supports (Fig. 80,1).
Release the securing strap.
Fold the split sleeping area backwards (Fig. 80).
Pull the safety net (Fig. 81,3) to the inside and let it hang down.
Place the mattress (Fig. 81,5) onto the sleeping area.
Hook the access ladder into the holders (Fig. 81,4) of the folding bed.
Lock the retaining straps (Fig. 81,2) of the safety net in the holders on the
ceiling (Fig. 81,1).
Convert the seating group under the folding chair to a bed (see
section 7.7).
Fig. 78 Lift the folding bed Fig. 79 Swivel the folding bed
Fig. 80 Sleeping area unfolded Fig. 81 Folding bed, set up