Operation Manual

aravan - 09-08 - DET-0030-08EN

Living

7.8 Television

Flat screen in the TV

cabinet

The flat screen is attached to a console in the TV cabinet.

Pulling the television

console forward:

Press the release knob (Fig. 67,5) and pull the holder for the flat screen for-

ward as far as possible by the handle (Fig. 67,4).

Swivelling the television

console:

Pull the release knob (Fig. 67,1) and swivel flat screen (Fig. 67,2) to the

desired position.

Loosen knurled screw (Fig. 67,3).

Set the desired angle for the flat screen and re-tighten the knurled screw.

Flat screen with jointed

arm

The flat screen is fastened to a jointed arm.

Positioning the flat screen

with jointed arm:

Pull on the fabric strip (Fig. 68,3) to unlock the jointed arm (Fig. 68,2).

Swivel flat screen (Fig. 68,1) into the required position.

Take hold of the flat screen at the top and bottom edge with both hands and

set the desired angle of inclination.

Before commencing the journey, remove the television from the support

and store it securely.

Before commencing the journey, place and secure the flat screen and

screen support in the initial position. If stored in the TV cabinet, close the

TV cabinet.

Before commencing the journey, ensure that the antenna is in park posi-

tion. Danger of accidents!

Fig. 67 TV cabinet

Fig. 68 Flat screen with jointed arm