Operation Manual

aravan - 09-08 - DET-0030-08EN

Maintenance

13.6.9 Light column

Changing bulbs: Remove trays (Fig. 199,2).

Compress the lamp glass (Fig. 199,1) lightly and remove.

Remove halogen bulb.

Put in a new halogen bulb.

Reassemble the lamp in the reverse order.

13.7 Changing the battery of the wardrobe light with LED

The wardrobe light has a button cell that supplies voltage to the LED.

Changing the battery:

Carefully push back the retaining clip (Fig. 200,3) on the top side of the

wardrobe light (Fig. 200,5). This exposes the nose (Fig. 200,4) on the

retaining clip.

Pull the battery holder (Fig. 200,2) out at the top.

Take the button cell (Fig. 200,1) out of the battery holder.

Insert new button cell of the same type (+/-), observing the correct polarity.

Insert the battery holder with the retaining clip to the rear of the housing and

push it downwards until the nose snaps into place.

Fig. 199 Light column

Use only button cells of the same type.

Fig. 200 Wardrobe light with opened

battery compartment