Operation Manual

16
9C
aravan - 09-08 - DET-0030-08EN
Maintenance
1
3
Change the fluorescent tube.
Reassemble the lamp in the reverse order.
13.6.5 Recessed halogen light (flat)
The recessed halogen light (Fig. 194,1) is installed flush.
Changing bulbs:
Use a screwdriver to remove the inner cover ring (Fig. 195,1) from the
housing.
Use a screwdriver to remove the cover ring with the glass (Fig. 195,2) from
the lower section of the recessed halogen light.
Remove halogen bulb (Fig. 195,3).
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
13.6.6 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 196,1).
Changing bulbs:
Use a screwdriver to remove the inner cover ring (Fig. 196,3) from the
housing.
Remove the cover ring with the glass.
Remove halogen bulb (Fig. 196,2).
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
Fig. 194 Recessed halogen light (flat) Fig. 195 Changing the halogen bulb
Fig. 196 Recessed halogen light