Operation Manual

14
9C
aravan - 09-08 - DET-0030-08EN
Sanitary fittings
1
1
Flushing: Before flushing open the sliding trap of the Thetford toilet. To do this, push
the slide lever (Fig. 171,1) in an anticlockwise direction.
For flushing, press the blue flush button (Fig. 172,1).
After flushing close the sliding trap. To do this push the slide lever in a
clockwise direction.
The indicator lamp (Fig. 172,2) goes on whenever the Thetford cassette has
to be emptied.
Emptying:
Turn the slide lever (Fig. 171,1) in a clockwise direction. The sliding trap is
closed. To empty, the sliding trap in the Thetford toilet must be closed.
Remove the Thetford cassette and empty it as described in sections 11.7.4
and 11.7.5.
11.7.2 Toilet with separate water tank
The Thetford toilet is flushed via its own water tank, which is integrated in the
toilet compartment.
The flap for the Thetford cassette (Fig. 173) is located on the outside of the
vehicle.
Filling the water tank:
Insert key into locking cylinder of the push-button lock (Fig. 173,1) and turn
a quarter turn in a clockwise direction.
Remove the key.
Press both push-button locks (Fig. 173,2) simultaneously with your thumb
and open the flap for the Thetford cassette.
Swing the fresh water filler neck (Fig. 174,1) towards the outside.
Remove screw cap (Fig. 174,2).
Fig. 171 Thetford toilet bowl, swivelling Fig. 172 Flush button/indicator lamp
Thetford toilet
Fig. 173 Flap for Thetford cassette Fig. 174 Thetford cassette