Operation Manual

9
9M
otorcaravan - 09-08 - DET-0033-07EN
Living
7
7.13.6 Front bench seat
Turn the driver's seat (Fig. 117,4) and push it all the way forward.
Convert the table (Fig. 117,3) to a bed foundation (see section 7.7).
If the vehicle has a guest bed foundation (Fig. 118,6), remove the back
cushion (Fig. 117,1) and the seat cushion (Fig. 117,2) and lay them aside.
Depending on the model, lay the included guest bed foundation
(Fig. 118,6) onto the table. Lay the front edge of the guest bed foundation
directly against the driver's seat or the brace on the driver's cabin.
Place the additional cushion (Fig. 118,5) on the driver's seat.
Place the seat cushion (Fig. 118,2) on the table.
Insert the back cushion (Fig. 118,1) between the seat cushion and the rear
wall. Observe the wedged form.
If required, push the driver's seat (Fig. 118,4) back to the rear.
Fig. 117 Prior to conversion
Fig. 118 After conversion
1 Back cushion
2 Seat cushion
3Table
4 Driver's seat
5 Additional cushion
6 Guest bed foundation