Operation Manual

9
5M
otorcaravan - 09-08 - DET-0033-07EN
Living
7
7.13.2 Central seating group with extension
Extend the table (Fig. 105,3) and convert it into a bed foundation (see
section 7.7).
Insert the bar (Fig. 105,7) or pull it inwards. The bar is correctly positioned
if it supports the table-top about 15 - 20 cm behind the table leg.
Pull on the handle (Fig. 105,8) and open the flap (Fig. 105,5).
Fold up the bench seat extension (Fig. 106,6) and wedge it with the flap.
Pull the seat cushions (Fig. 107,2) forwards and to the middle.
Insert the back cushions (Fig. 107,1) between the seat cushions and the
wall.
Insert the additional cushions (Fig. 107,9) between the back cushions and
the wall.
Insert the additional cushions (Fig. 107,10) between the seat cushions and
the wall.
Fig. 105 Prior to conversion
Fig. 106 During conversion
Fig. 107 After conversion
1 Back cushion
2 Seat cushion
3 Table
4 Mounting rail
5Flap
6 Bench seat extension
7Bar
8 Handle
9 Additional cushion
10 Additional cushion
Depending on the model, instead of the second back cushion (Fig. 107,1)
and the second additional cushion (Fig. 107,9) two smaller additional cush-
ions must be inserted.