Operation Manual

8
9M
otorcaravan - 09-08 - DET-0033-07EN
Living
7
Folding upwards: Lift the mattress forwards and set it down on the panel.
Fold the front of the overcab bed (Fig. 96,1) upwards. The overcab bed is
kept in the upper position by gas-pressure springs.
Folding downwards:
Pull overcab bed downwards.
If necessary, push the mattress behind the panel.
7.12.2 Pull-down bed (model I)
Preparing the driver's
cabin
Depending on equipment, the driver's and front passenger's seats have to be
adjusted in different ways before lowering the pull-down bed.
Variant 1 The seats of the central seating group in opposite direction to the direction of
travel are not equipped with headrests (no safety package).
Turn the driver's seat and the front passenger's seat to the direction of
vehicle travel, lock them in place and move them backwards.
Fold the backrest back.
Close the shade in the driver's cabin.
Fig. 96 Overcab bed, folded upwards
The maximum permitted pull-down bed load is 200 kg.
The pull-down bed is not to be used for the storage of luggage. When
the bed is not being used, only place the bed linen which is required for
two persons in it.
Before commencing the journey, secure the pull-down bed to the roof
using the retaining belt. Tighten the retaining belt firmly.
Only use the pull-down bed, if the safety net is set up.
Never allow small children to remain in the pull-down bed without super-
vision.
But in particular with regard to small children less than 6 years of age,
users should ensure that they cannot fall out of the pull-down bed.
Use separate children's beds or travel cots suitable for children.
Switch off the reading lamps on the underside of the pull-down bed when
the bed is lowered. Fire hazard!
Switch off the reading lamps in the pull-down bed before the bed is
pushed up. Fire hazard!
Depending on the seat model, the backrest is under strong spring ten-
sion. If there is no resistance to the backrest in these seats, it quickly
moves forward after unlocking.