Operation Manual

8
1M
otorcaravan - 09-08 - DET-0033-07EN
Living
7
7.7.2 Suspension table (bar seating group)
The suspension table size can be enlarged by pulling out a table-top exten-
sion.
Extending:
Loosen knurled screw (Fig. 77,1).
Pull out the table-top extension (Fig. 77,2) as far as possible (Fig. 78).
Guide table-top extension (Fig. 78,1) upwards in a circular movement. The
table-top extension lies flush with the table-top.
Reducing size:
Pull table-top extension (Fig. 78,1) away from the table-top as far as it will
go and press downwards against the resistance of the retaining springs.
The table-top extension moves downwards in a circular movement
(Fig. 78).
Push in the table-top extension as far as it will go.
Tighten knurled screw (Fig. 77,1).
The table's fold-out leg enables it to be used as a bed foundation.
Conversion to bed
foundation:
Slightly raise the front of the table-top (Fig. 79,1).
Unlock table leg (Fig. 79,3) at the hinge and fold it in.
Push the table-top approx. 45° upwards and remove holders (Fig. 79,4)
from the upper mounting rail.
Depending on the model, insert both additional support legs (Fig. 79,2) into
the holders (Fig. 79,5) on the bottom side of the table.
Attach suspension table to the lower mounting rail and rest it onto the table
leg hinge.
Fig. 77 Lock for table-top extension Fig. 78 Table-top extension
Fig. 79 Bed foundation