Operation Manual

8
0 Motorcaravan - 09-08 - DET-0033-07E
N
Living
7
Extending: Undo the knurled screws (Fig. 74,2).
Lift the table-top slightly and pull out it out as far as possible. The table
extension (Fig. 74,1) is fully extended.
Set down the table.
Insert the table-top extension in the table extension.
Lift the table-top slightly and push it back as far as possible.
Tighten the knurled screws.
Reducing size:
Undo the knurled screws (Fig. 74,2).
Slightly lift the front of the table-top and pull out.
Remove the table-top extension and store it securely.
Lift the table-top slightly and push it back as far as possible. The table
extension (Fig. 74,1) is fully retracted.
Set down the table.
Tighten the knurled screws.
The table's fold-out leg enables it to be used as a bed foundation.
Conversion to bed
foundation:
Lift the front of the table-top (Fig. 75,1) by approx. 45°.
Fold the lower part of the fold-out leg (Fig. 75,3) by 90°. Depending on the
model, pull the lower part of the fold-out leg down or push the release knob.
Press the release knob (Fig. 76,1) on the lock (Fig. 75,4).
Swivel the table-top approx. 45° upward and remove the table from the
retainer.
Depending on the model, insert both additional support legs (Fig. 75,2) into
the holders (Fig. 75,5) on the bottom side of the table.
Insert the table into the lower retainer and lock it.
Fig. 75 Bed foundation Fig. 76 Lock