Operation Manual

7
9M
otorcaravan - 09-08 - DET-0033-07EN
Living
7
7.6 Rotating seats
Depending on the model, the lever for turning the seats is located at the front
of the seat or on the left or right side.
Turning:
Push both armrests at the driver's/front passenger's seat upward.
Push the driver's seat/front passenger's seat backwards or into the central
position.
Push or pull the lever (Fig. 72,3 or Fig. 73,4) to turn the seat. The seat is
released from the locking device.
The seats can be rotated in any direction. The seats can only be locked in posi-
tion in the direction of travel.
7.7 Tables
7.7.1 Suspension table with fold-out leg
The suspension table size can be enlarged by inserting a table-top extension.
Before commencing the journey, rotate all swivel seats in the direction
of travel and lock in position. During the journey, the swivel seats must
remain locked in place in the direction of travel.
Setting the position of the seats and armrests is described in chapter 5.
Move the seats all the way down before turning. Otherwise, the seats
cannot be turned.
Fig. 72 Driver's and front passenger's
seats (Aguti)
Fig. 73 Driver's and front passenger's
seats (ISRI)
Depending on the model, different table-top extensions and fold-out legs
are used. Therefore the table can deviate from the type shown here. The
principle of the conversion is the same for all tables.
Fig. 74 Extend suspension table