Operation Manual

5
7M
otorcaravan - 09-08 - DET-0033-07EN
Pitching the motorhome
6
Extending: Place the socket spanner on the hexagon nut (Fig. 31,1) and rotate until
the steady leg is in a perpendicular downward position.
Remove the splint (Fig. 31,4) out of the support foot extension (Fig. 31,5).
Extend the support foot extension until it has reached the required length.
Insert the splint in the support foot extension.
Rotate the hexagonal nut until the steady leg rests completely on the
ground and the vehicle is in a horizontal position.
Retracting:
Place the socket spanner on the hexagon nut (Fig. 31,1) and rotate until
the steady leg is clear of the ground.
Remove the splint (Fig. 31,4) out of the support foot extension (Fig. 31,5).
Push in the support foot extension (Fig. 31,5) and insert the splint
(Fig. 31,4) in the drilled hole in the support foot extension.
Rotate the hexagonal nut (Fig. 31,1) with the socket spanner until the
steady leg has swung upwards and the guide disc (Fig. 31,3) has com-
pletely retracted into the notch (Fig. 31,2).
6.5 240 V connection
The vehicle can be connected to a 240 V power supply (see chapter 9).
6.6 Refrigerator
The 12 V operation of the refrigerator is only possible when the vehicle engine
is running. When the vehicle engine is switched off, switch the refrigerator to
240 V operation or gas operation.
Fig. 31 Steady leg
Before commencing the journey, observe the following: Are all steady legs
and support foot extensions retracted completely and secured with the
splint?