Operation Manual

3
5M
otorcaravan - 09-08 - DET-0033-07EN
Before the journey
4
The load rack permits transport of a load (e.g. a motor scooter or up to four
bicycles) weighing up to 150 kg.
Different attachments are available to transport the load. Our authorised
dealers and service centres will be happy to advise you.
Pulling out:
Turn the spring latch (Fig. 3,1) on both sides half a turn and allow to engage
in the locking position (Fig. 3).
Pull load rack (Fig. 3,2) out straight as far as it will go.
Turn the spring latch on both sides back half a turn and allow to engage
(Fig. 4).
Loosen knurled screws (Fig. 5,2) on both sides.
Fold up lamp holder (Fig. 5,1).
Retighten the knurled screws.
Connect the electrics between the load rack and the vehicle.
Pushing in:
Disconnect the electrics between the load rack and the vehicle.
Loosen knurled screws (Fig. 5,2) on both sides.
Fold in lamp holder (Fig. 5,1).
Retighten the knurled screws.
The load rack and caravan coupling may not be used simultaneously.
The load rack has a EG type approval number.
Observe the country-specific regulations.
Also read the manufacturer's instruction manual.
Fig. 3 Lock on extension, released Fig. 4 Lock on extension, locked
Fig. 5 Lamp holder lock