Operation Manual

20
1M
otorcaravan - 09-08 - DET-0033-07EN
Sanitary fittings
1
1
Let some water run into the toilet bowl before using the toilet. In order to do so
press the flush button (Fig. 231,3) on the control and operating unit
(Fig. 230,2).
Flushing:
Before flushing open the sliding trap of the toilet. For this pull out the slide
lever (Fig. 230,1).
For flushing, press the flush button (Fig. 231,3).
After flushing close the sliding trap. To do so, push the slide lever back.
The indicator lamp (Fig. 231,2) goes on whenever the sewage tank is filled up
to 3/4.
The indicator lamp (Fig. 231,1) goes on whenever the sewage tank has to be
emptied.
Emptying the water tank:
Open the sliding trap. For this pull out the slide lever (Fig. 230,1).
Press the flush button until water ceases to flow into the bowl.
Close the sliding trap. To do so, push the slide lever back.
Empty the sewage tank.
Emptying the sewage tank:
Push the slide lever (Fig. 230,1) in. The sliding trap is closed. To empty, the
sliding trap of the toilet must be closed.
Remove the sewage tank and empty it as described in sections 11.8.5 and
11.8.6. The display "Sewage tank removed" (Fig. 231,4) lights up on the
control and operating unit.
11.8.4 Vacuum toilet (Dometic)
The flushing of the toilet is fed directly from the water system of the vehicle.
Fig. 230 Toilet bowl with control and
operating unit
Fig. 231 Control and operating unit
toilet
Only flush the toilet if the toilet lid is closed.