Operation Manual

19
9M
otorcaravan - 09-08 - DET-0033-07EN
Sanitary fittings
1
1
The operating unit is located close to the toilet bowl.
Flushing:
Before flushing open the sliding trap of the Thetford toilet. To do this, push
the slide lever (Fig. 224,1 or Fig. 225,1) in an anticlockwise direction.
For flushing, press the blue flush button (Fig. 226,1 or Fig. 227,1).
After flushing close the sliding trap. To do this push the slide lever in a
clockwise direction.
The indicator lamp (Fig. 226,2 or Fig. 227,2) goes on whenever the Thetford
cassette has to be emptied.
Emptying the water tank:
Open the sliding trap. To do this, turn the slide lever in an anticlockwise
direction.
Press the flush button until water ceases to flow into the bowl.
Close the sliding trap. To do this push the slide lever in a clockwise direc-
tion.
Empty Thetford cassette.
Emptying the Thetford
cassette:
Push the slide lever (Fig. 224,1 or Fig. 225,1) in a clockwise direction. The
sliding trap is closed. To empty, the sliding trap in the Thetford toilet must
be closed.
Remove the Thetford cassette and empty it as described in sections 11.8.5
and 11.8.6.
11.8.2 Toilet with fixed seat
The flushing of the toilet is fed from the water system of the vehicle.
Fig. 224 Thetford toilet bowl, swivelling Fig. 225 Thetford toilet bowl, swivelling
(alternative)
Fig. 226 Flush button/indicator lamp
Thetford toilet
Fig. 227 Flush button/indicator lamp
Thetford toilet (alternative)