Operation Manual

15
5M
otorcaravan - 09-08 - DET-0033-07EN
Appliances
1
0
Switching on: Connect the vehicle to the 240 V power supply (see section 9.10.1).
Turn the control knob (Fig. 169,2) to the required heating level.
Switching off:
Turn control knob (Fig. 169,2) to "0" position.
After switching off, the floor remains warm for a while, due to residual heat.
If the regulator is overloaded, the overload protection is actuated. The pin
(Fig. 169,1) jumps out.
Switching on overload
protection:
Press the pin (Fig. 169,1) on the overload protection when the regulator is
cooled.
10.3 Air conditioning unit
10.3.1 Dometic
Fig. 169 Regulator for electrical floor
warming unit
If the unit is operating, always open at least one ventilation flap.
In the winter, vehicle heating can be supported but not replaced by the air
conditioning unit.
Also read the manufacturer's instruction manual.
Fig. 170 Remote control
1 Symbol for automatic mode
2 Symbol for cold mode
3 Symbol for warm mode
4 Symbol for ventilation mode
5 Symbol for discharged batteries
6Time
7 Temperature display
8 Fan speed display
9 ON/OFF button
10 Fan speed button
11 "MODE" button
12 "CLOCK" button
13 Reset key
14 Interior temperature display button
"ROOM"
15 Store button "SET"
16 Light button "LIGHT"(optional)
17 Temperature unit change button
"F/C°"
18 Temperature decrease button "-"
19 Temperature increase button "+"
20 Display