Operation Manual

1
50 Motorcaravan - 09-08 - DET-0033-07E
N
Appliances
1
0
Switching on the heater: Press the " " button (Fig. 160,4). The "Off" symbol (Fig. 161,2) flashes.
Press the "+/On" button (Fig. 160,3). The "On" symbol (Fig. 161,1) flashes.
The heater starts automatically.
Press the " " button (Fig. 160,2). The operation ends, the display moves
to home position and the "On" symbol lights up.
Switching the heater off:
Press the " " button (Fig. 160,4). The "On" symbol (Fig. 161,1) flashes.
Press the "-/Off" button (Fig. 160,5). The "Off" symbol (Fig. 161,2) flashes.
The heater is turned off.
Press the " " button (Fig. 160,2). The operation ends, the display moves
to home position and the "Off" symbol lights up.
Alde heat exchanger
The heat exchanger can be used to heat the living area of the vehicle during
travel without operating the hot-water heater in the living area.
The heat exchanger is connected to the vehicle engine's cooling circuit and
thus has the same function as the vehicle heater.
Heat output is set with the living area's heating regulator.
The heat exchanger stop cock is located directly on the exchanger.
Turning on:
Set stop cock handle (Fig. 162,1) parallel to the pipe.
Shutting off:
Set drain cock handle (Fig. 162,1) at a right angle to the pipe.
The heat exchanger only works when the vehicle engine is running.
If the heat exchanger is not being used (as in the summer), the heat
exchanger on the stop cock should be shut off.
Fig. 162 Alde heat exchanger