Operation Manual

1
3M
otorcaravan - 09-08 - DET-0033-07EN
Guarantee
1
We reserve the right to modify the inspection plan.
1.5 Side wall floor plateau left connection Visual check
1.6 Connection to driver's cabin Visual check
1.7 Base frame with base frame cut-outs Visual check
1.8 Check the status of the outer metal sheets Visual check
1.9 Check the status of the window rubbers, expan-
sion joints, sealing joints
Visual check
2.1 Measure the floor plateau at this connection
point with a moisture measuring device, write
down the corresponding values with the date of
the assessment. Prescribed maximum values –
up to 20 % normal.
If the values are above 20 % check if it is due to
accumulated condensation.
Measuring
2.2 Measure inside the vehicle (walls, window sec-
tions, roof, etc.), note changes in the colour of
the decor. Prescribed maximum values – up to
20 % normal.
If the values are above 20 % check if it is due to
accumulated condensation.
Measuring
3.1 Wheel housing Spray with Dethleffs
special weatherproof
solution
3.2 Rear wall floor plateau connection Spray with Dethleffs
special weatherproof
solution
3.3 Front wall floor plateau connection Spray with Dethleffs
special weatherproof
solution
3.4 Side wall floor plateau right connection Spray with Dethleffs
special weatherproof
solution
3.5 Side wall floor plateau left connection Spray with Dethleffs
special weatherproof
solution
Pos. Component Activity