Operation Manual

7
2 Caravan - 02-08 - DET-0030-07E
N
Living
7
Electric operation The rear bed is raised or lowered with a rocker switch.
Lifting the bed:
Press upper part of the rocker switch (Fig. 76,1) and keep it pressed until
the bed is located somewhat over the desired position or at the end posi-
tion.
Bring the four support brackets (Fig. 77,2) to the desired height and insert
the safety tabs in the holes (Fig. 77,3) on the four support rails (Fig. 77,1).
Press lower part of the rocker switch (Fig. 76,1) and keep it pressed until
the bed rests on the support brackets.
Lowering the bed:
Press upper part of the rocker switch (Fig. 76,1) and keep it pressed until
the bed has slightly moved upwards.
Pull out the four support brackets (Fig. 77,2) from the holes (Fig. 77,3) on
the four support rails (Fig. 77,1) and re-insert them at the desired position.
Press lower part of the rocker switch (Fig. 76,1) and keep it pressed until
the bed rests on the support brackets.
7.11.5 Folding bed
Fig. 76 Operating switch for the elec-
tronically adjustable rear bed
Fig. 77 Support bracket for the rear
bed
The maximum permitted folding bed load is 50 kg.
Always use folding bed with the safety net in position.
An uncontrolled opening of the bed can lead to an accident.
Never allow small children to remain in the folding bed without supervi-
sion.
But in particular with regard to small children less than 6 years of age,
users should ensure that they cannot fall out of the folding bed.
Use separate children's beds or travel cots suitable for children.
Take care when swivelling the folding bed. Curtains or net curtains could
be trapped and damaged.