Operation Manual

7
0 Caravan - 02-08 - DET-0030-07E
N
Living
7
When the bunk bed is folded up, secure it with the retaining belt (Fig. 72,1).
Depending on the model, the vehicle is fitted with a folding bunk bed. When
the bunk bed is folded down, it can be used immediately without any additional
conversion.
The bunk beds can be folded up. The space under the bed can be used for
storage.
7.11.3 Fixed bed (gas-pressure springs)
A storage compartment is underneath the bed. Lift up the slatted frame to
place items in the storage compartment or to empty it from the inside.
Opening:
Lift the mattress forwards and set it down on the panel.
Lift slatted frame. The gas-pressure springs (Fig. 73,1) hold the slatted
frame open.
Closing:
Press the slatted frame downwards against the resistance of the gas-pres-
sure spring.
If necessary, push the mattress behind the panel.
7.11.4 Rear bed, adjustable
Fig. 72 Bunk bed, folding
Fig. 73 Fixed bed
Do not reach into the area between the bed and the side wall when low-
ering or raising. Danger of bruises!
Only lower or raise the bed when there are no loads on it.
Only lower or raise the bed when the space between the bed and the
side wall is clear.
Only lower the bed if the lowering area in the rear garage is clear.