Operation Manual

6
7C
aravan - 02-08 - DET-0030-07EN
Living
7
7.8 Television
Flat screen in the TV
cabinet
The flat screen is attached to a console in the TV cabinet.
Pulling the television
console forward:
Press the release knob (Fig. 67,5) and pull the holder for the flat screen for-
ward as far as possible by the handle (Fig. 67,4).
Swivelling the television
console:
Pull the release knob (Fig. 67,1) and swivel flat screen (Fig. 67,2) to the
desired position.
Loosen knurled screw (Fig. 67,3).
Set the desired angle for the flat screen and re-tighten the knurled screw.
Flat screen with jointed
arm
The flat screen is fastened to a jointed arm.
Positioning the flat screen
with jointed arm:
Pull on the fabric strip (Fig. 68,3) to unlock the jointed arm (Fig. 68,2).
Swivel flat screen (Fig. 68,1) into the required position.
Take hold of the flat screen at the top and bottom edge with both hands and
set the desired angle of inclination.
Before commencing the journey, remove the television from the support
and store it securely.
Before commencing the journey, turn the flat screen and the screen
holder back to the basic position and slide them in until they lock into
place. Close the TV cabinet.
Before commencing the journey, ensure that the antenna is in park posi-
tion. Danger of accidents!
Fig. 67 TV cabinet
Fig. 68 Flat screen with jointed arm