Operation Manual

2
7C
aravan - 02-08 - DET-0030-07EN
Before the journey
4
4.4.1 WS 3000 D stabiliser
Connecting: Pull the coupling handle (Fig. 1,1) upwards into position "Open" (Fig. 1,2).
Stabiliser is open.
Set down the open stabiliser on the caravan ball of the towing vehicle and
release the coupling handle. The handle glides automatically back to its ini-
tial position (Fig. 1,3).
In addition, push the coupling handle down with your hand (not with your
foot). Closing and securing is carried out automatically.
Conduct a visual inspection: The caravan ball must not be visible in the
attached state.
Activate the stabilising mechanism. To do this, press the coupling handle
downwards (Fig. 1,4) from the closed position (Fig. 1,3) to its stop limit.
To deactivate the stabilisation mechanism, e.g. for manoeuvring, pull the cou-
pling handle (Fig. 1,1) slowly upward to the closed position (Fig. 1,3).
4.4.2 AKS 3004 stabiliser
Connecting: Pull up the stabilising lever (Fig. 2,1) as far as possible.
Pull the coupling handle (Fig. 2,2) upwards.
Place the opened stabiliser on the caravan coupling. The coupling handle
must audibly lock back into its initial position.
In addition, push the coupling handle downwards by hand (not with your
foot). Closing and securing is carried out automatically.
Conduct a visual inspection: The green cylinder on the safety indicator
(Fig. 2,3) must be visible.
Activate the stabilising mechanism. Push the stabilising lever (Fig. 2,1)
down to its stop limit.
Fig. 1 WS 3000 D stabiliser
Fig. 2 AKS 3004 stabiliser