Operation Manual

16
9C
aravan - 02-08 - DET-0030-07EN
Maintenance
1
3
Change the fluorescent tube.
Reassemble the lamp in the reverse order.
13.6.5 Recessed halogen light (flat)
The recessed halogen light (Fig. 191,1) is embedded in the panel or the
canopy.
Changing bulbs:
Use a screwdriver to remove the inner cover ring (Fig. 192,1) from the
housing.
Use a screwdriver to remove the cover ring with the glass (Fig. 192,2) from
the lower section of the recessed halogen light.
Remove halogen bulb (Fig. 192,3).
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
13.6.6 Recessed halogen light with housing
The recessed halogen light is installed flush in a housing (Fig. 193,1).
Changing bulbs:
Use a screwdriver to remove the inner cover ring (Fig. 193,3) from the
housing.
Remove the cover ring with the glass.
Remove halogen bulb (Fig. 193,2).
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
Fig. 191 Recessed halogen light (flat) Fig. 192 Changing the halogen bulb
Fig. 193 Recessed halogen light