Operation Manual

08 Caravan - 02-08 - DET-0030-07E

Appliances

Changing the battery on the

automatic ignition:

Make certain that the heater is switched off.

Remove heater cover (Fig. 122,2). Pull the heater cover upwards and for-

wards, press up the retaining springs (Fig. 122,1) to the side and tip the

cover forwards.

Turn the cover (Fig. 123,1) to the side, so that the connecting cables for the

hot-air fan as well as the ignition control lamp do not need to be discon-

nected.

Push battery chamber cover on the automatic ignition (Fig. 123,2) upward.

Remove the old battery out of the battery chamber of the automatic ignition.

Insert a new battery (Fig. 123,3) of the same type, correctly aligned (+/-),

into the battery chamber of the automatic ignition. Only use temperature

resistant (+70 °C) and leak-proof Mignon batteries.

Push battery chamber cover on the automatic ignition upward.

Press the stop lever to the right, until the lock engages audibly.

Mount the heater cover. To do this, place the cover (Fig. 124,1) on the

lower retaining clips (Fig. 124,2).

Insert the operating rod from underneath into the grip socket and allow the

cover to catch in place above.

Fig. 122 Removing heater cover Fig. 123 Heater opened

Fig. 124 Heater cover, retaining clips