Operation Manual

3
5C
aravan - 11-06 - DET-0030-05EN
Before the journey
4
Loading the vehicle via
the drive-on ramp
The vehicle is easier to load via the drive-on ramp.
Open the rear flap (see chapter 7).
Remove the safety device (e.g. padlock, Fig. 7,1) from the drive-on ramp
(Fig. 7,2).
Hold the drive-on ramp in the horizontal position and pull it out to the rear
as far as possible.
Place the drive-on ramp on the ground (Fig. 8).
Insert the edge guard (Fig. 8,1) in both holders in the drive-on ramp
(Fig. 8,2).
To push in the drive-on ramp, carry out the steps in reverse order.
4.7 PVC-floor covering
4.8 Television
Fig. 7 Securing the drive-on ramp Fig. 8 Drive-on ramp (pulled out)
Shoes with pointed heels can leave permanent impressions in the PVC-
floor covering. Never wear shoes with pointed heels in the vehicle.
Before commencing the journey, remove the television from the support
and store it securely.
Before commencing the journey, turn the flat screen and the screen
holder back to the basic position and slide them in until they lock into
place. Close the TV cabinet.
Before commencing the journey, ensure that the antenna is in park posi-
tion. Danger of accidents!
Further information on positioning the flat screen can be obtained from
chapter 7.