Operation Manual

2
7C
aravan - 11-06 - DET-0030-05EN
Before the journey
4
4.4.1 Albe caravan coupling
Connecting: Pull the coupling handle (Fig. 1,1) upwards. The caravan coupling is open.
Place the open caravan coupling on the towing vehicle towing ball and
release the coupling handle. The caravan coupling now locks automatically
and audibly in place. The handle glides automatically back to its initial posi-
tion.
In addition, push the coupling handle (Fig. 1,1) down with your hand (not
with your foot). Closing and securing is carried out automatically.
Conduct a visual inspection: Safety display (Fig. 1,2) must be in the "+"
position. The caravan ball must not be visible in the attached state.
4.4.2 WS 3000 D stabiliser
Connecting: Pull the coupling handle (Fig. 2,1) upwards into position "Open" (Fig. 2,2).
Stabiliser is open.
Set down the open stabiliser on the caravan ball of the towing vehicle and
release the coupling handle. The handle glides automatically back to its ini-
tial position (Fig. 2,3).
In addition, push the coupling handle down with your hand (not with your
foot). Closing and securing is carried out automatically.
Conduct a visual inspection: The caravan ball must not be visible in the
attached state.
Activate the stabilising mechanism. To do this, press the coupling handle
downwards (Fig. 2,4) from the closed position (Fig. 2,3) to its stop limit.
To deactivate the stabilisation mechanism, e.g. when driving on ice or snow,
pull the coupling handle (Fig. 2,1) slowly upward to the closed position
(Fig. 2,3).
Fig. 1 EM 150 R caravan coupling
Fig. 2 WS 3000 D stabiliser