Operation Manual

15
7C
aravan - 11-06 - DET-0030-05EN
Maintenance
1
3
13Maintenan ce
Chapter overview
This chapter contains instructions about inspection and maintenance work
concerning the vehicle.
The maintenance instructions address the following topics:
stabiliser
braking system
Alde hot-water heater
replacing bulbs and fluorescent tubes
spare parts
13.1 Inspection work
Like any technical appliance, the vehicle must be inspected at regular inter-
vals.
This inspection work must be carried out by qualified personnel.
Special technical knowledge, which cannot be taught within the framework of
this instruction manual, is required for these tasks. Personnel possessing this
technical knowledge are available for assistance at all Dethleffs service cen-
tres. Their experience and regular technical instruction by the factory as well
as equipment and tools guarantee expert and up-to-date inspection of the
vehicle.
In the inspection record of this instruction manual, the Dethleffs service centre
will confirm any work carried out.
13.2 Maintenance work
As with every machine, this vehicle requires maintenance. The extent and fre-
quency of the maintenance work required depend on conditions of operation
and use. More difficult operating conditions make it necessary to service the
vehicle more often.
Have the appliances serviced at the intervals specified in the corresponding
instruction manuals.
13.3 Stabilisers
13.3.1 General
Clean the stabiliser and the coupling head regularly. Use either thinners or
white spirit. When lubricating the stabiliser ensure that no lubricant is on the
friction pads.
Note the inspections listed in the inspection record and have them carried
out at the specified intervals. The value of the vehicle is thus preserved.
The inspection record also serves as valid proof in the case of damage and
claims under the guarantee.