Operation Manual

14
5C
aravan - 11-06 - DET-0030-05EN
Sanitary fittings
1
1
11.7.2 Toilet with fixed seat
Flushing: Press flush button (Fig. 161,1) and at the same time rotate in an anticlock-
wise direction.
After flushing, turn flush button in a clockwise direction, the sliding trap is
closed.
Emptying:
Turn the flush button (Fig. 161,1) in a clockwise direction. The sliding trap
is closed. To empty, the sliding trap in the Thetford toilet must be closed.
Remove the Thetford cassette and empty it as described in sections 11.7.4
and 11.7.5.
11.7.3 Toilet with separate water tank
The Thetford toilet is flushed via its own water tank, which is integrated in the
toilet compartment.
The flap for the Thetford cassette (Fig. 162) is located on the outside of the
vehicle.
Filling the water tank:
Insert key into locking cylinder of the push-button lock (Fig. 162,1) and turn
a quarter turn in a clockwise direction.
Remove the key.
Press both push-button locks (Fig. 162,2) simultaneously with your thumb
and open the flap for the Thetford cassette.
Swing the fresh water filler neck (Fig. 163,1) towards the outside.
Remove screw cap (Fig. 163,2).
Fill with fresh water until the fluid level reaches the top edge. This corre-
sponds to approx. 15 l.
Close the screw cap.
Fig. 161 Thetford toilet with fixed seat
Fig. 162 Flap for Thetford cassette Fig. 163 Thetford cassette