Operation Manual

12
1C
aravan - 11-06 - DET-0030-05EN
Appliances
1
0
10.5.1 Gas cooker
Depending on the model, the operating controls for the gas cooker are found
on the operating panel on the refrigerator or directly on the gas cooker.
Switching on:
Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
Open the gas cooker lid.
Turn the control knob (Fig. 131,1) on the burner you wish to use to the igni-
tion position (large flame).
Press the control knob down and hold it.
Light the burner with a gas lighter, a match or other suitable means of
lighting.
Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.
Release the control knob and turn to the desired setting.
If ignition is unsuccessful, repeat the entire procedure.
During activation and operation of the gas cooker, no flammable objects
or highly inflammable objects such as dishcloths, napkins etc. must be
near the gas cooker. Fire hazard!
The process of ignition must be visible from above and must not be cov-
ered by cooking pans placed on the cooker.
Depending on the model, the gas cooker lid is held closed by a spring.
When closing there is danger of getting injured!
Do not use the glass gas cooker lid as a hob.
Do not close the gas cooker lid while the gas cooker is in operation.
Do not apply pressure on the gas cooker lid when it is closed.
Do not place hot cooking pans on the gas cooker lid.
Keep the gas cooker lid open after cooking until the burners are cool. Oth-
erwise the glass plate could shatter.
When the flame goes out, the thermocouple automatically cuts the gas
supply.
Further information can be obtained from the separate instruction manual
"Gas cooker".
Fig. 131 Operating controls for gas
cooker
Fig. 132 Alternative: Operating controls
for gas cooker