User guide

Receiving Inspection
Contact Factory on damages and missing equipment
Installation Preparation
104853Page3
REMOVE THESE TWO SCREWS
AND KEEP TO BE USED AGAIN
3-Position
Swtich
Assy.
(105422)
UDC 1000
Controller
(105421)
Line
Filter
(105416-2)
UDC 1000
Controller
(105421)
DetexPart#-12515-X
Verifythatthedeviceorderedisthecorrectmodelforthedoorapplication.Inspectpackagefor
possibleshippingdamages.Carefullycuttapeandopencardboardshippingbox.Packedinto
thisboxyouwilltypicallyndarmassembly,doordecal(s),headerassemblywithcontrolsand
associatedwiringandinstructiondocuments.Theoperatorsareshippedseparatelyinindividual
boxes.Removeitemsandplacethemcarefullyasidesotheywillnotbedamagedorlost.Usinga
#2Phillips,removethecoverscrewsandliftcover.Removepackingandinspect
allitemsbeforecontinuing.
ThehangerbracketassemblyisuniquetotheDetexLowEnergyAutomaticDoorOperator.It
allowstheinstallationtobeperformedbyoneperson,quicklyandefciently.
LocatePhillipsscrewsinsideatthetopcorners.Removethese(screwswillbeusedagain)and
separatetheenclosurefromthehangerplate.